CHECK WHAT OFFERS ARE CURRENTLY LIVE: CLICK HERE
TrustPilot Rating 4.6 ★★★★☆ - EXCELLENT - Read our 860+ Reviews

CloseClose
CloseClose
Close

10000+ products

Date, New to old

Filters & Sort by 

All

122 products

  • Maxton Design - Rear Valance VW Golf 8 GTI Clubsport

    Maxton Design Maxton Design - Rear Valance VW Golf 8 GTI Clubsport

      Rear Valance VW Golf 8 GTI Clubsport FITS:Volkswagen Golf GTI Clubsport Mk8 2020 - 2024Volkswagen Golf GTI Clubsport Mk8 Facelift 2024 - COMPLETE SET CONTAINS: -> Rear DiffuserCOLOUR:-> Gloss Black This product requires the removal of the original diffuser, self-tapping screws are needed to secure fitment of the new diffuser. CHARACTERISTICS: Adds aesthetic value. Lightweight and offers some flexibility. This product is made from ABS plastic. The same material is used widely in the automotive industry. MORE INFORMATION: No additional work is required to finish the product. The product will arrive with a protective film.  Removal of the protective film will void any returns, only remove once you are certain the product will fit. We cannot be held responsible for the incorrect installation or use of this product. Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.  We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual. This product has been TUV MATERIALGUTACHTEN certified. The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.

    £174.00

  • 034 Motorsport - RS+ Adjustable Solid Rear Sway Bar Upgrade, MQB AWD

    034 Motorsport 034 Motorsport - RS+ Adjustable Solid Rear Sway Bar Upgrade, MQB AWD

    034Motorsport’s RS+ Adjustable MQB Solid Rear Sway Bar for Audi 8V A3/S3, F3 Q3, 8S TT/TTS Quattro, and Volkswagen MK7/7.5 Golf R, Sportwagen, and Alltrack is now available! The 034Motorsport Adjustable Solid Rear Sway Bar is made from a single piece of high-quality, solid 0.938” thick spring steel for maximum rigidity, and is designed to combat understeer while reducing body roll under hard cornering without negatively impacting comfort. Vehicle Fitment:  -Volkswagen   Arteon   Golf Mk7 -Audi   S3 (8V)   S3 (8Y)   A3 (8Y 2020-)   A3 (8V 12-20)   TT Mk3 (8S)   Q3 (Mk2 18-) -SEAT  CUPRA  -Ateca               -Tarraco               -Leon Mk3 (5F)               -Formentor -Skoda  Kodiaq  Octavia Mk3 (5E)  Superb (3V 2015-)   NOTE: this sway bar will not fit these vehicles: 8S TTRS 8V.5 RS3 8Y RS3 Mk8 Golf R 2025+ 8Y.5 Audi S3 Why choose the RS+ Rear Sway Bar over our Standard MQB AWD Rear Sway Bar?Our Standard MQB AWD Rear Sway Bar was designed to provide a neutral handling experience. It reduces understeer while allowing drivers to coax their car into oversteer as desired.The RS+ Rear Sway Bar ticks things up a notch, providing over 171% stiffer than the factory rear sway bar and an additional 70% stiffness over our Standard MQB AWD Rear Sway Bar. This additional stiffness is great for owners looking to maximize rear end rigidity, turn-in response, and better rotation—further reducing understeer and maximizing handling performance! Rate Increase Data: 034Motorsport RS+ vs. Factory Sway Bar 034Motorsport RS+ (Soft) - 144% Rate Increase vs. Factory Audi 8V S3/Mk7 Golf R (22.0mm x 3.0mm) Hollow Rear Sway Bar 034Motorsport RS+ (Stiff) - 171% Rate Increase vs. Factory Audi 8V S3/Mk7 Golf R (22.0mm x 3.0mm) Hollow Rear Sway Bar 034Motorsport Standard MQB AWD Sway Bar vs Factory Sway Bar 034Motorsport Standard MQB AWD Sway Bar (Soft) - 42% Rate Increase vs. Factory Audi 8V S3/Mk7 Golf R (22.0mm x 3.0mm) Hollow Rear Sway Bar 034Motorsport Standard MQB AWD Sway Bar (Stiff) - 70% Rate Increase vs. Factory Audi 8V S3/Mk7 Golf R (22.0mm x 3.0mm) Hollow Rear Sway Bar The 034Motorsport RS+ Adjustable MQB Rear Sway Bar can be used with or without an upgraded Front Sway Bar. For avid track enthusiasts or those looking for the sharpest cornering, our Front Sway Bar is recommended to be paired with our RS+ Rear Sway Bar upgrade. For those looking for the absolute most rear end rotation, the factory front sway bar should be retained.034Motorsport Sway Bar Kits feature maintenance-free polyurethane bushings with a Teflon and polyester liner designed to enhance sway bar response speed while minimizing noise, vibration, and harshness (NVH). This liner also results in an extended service life that allows these bushings to even outlast your vehicle. With no need for additional lubrication, these bushings offer reliable, long-lasting performance without the hassle of regular maintenance and greasing. Built to withstand extreme conditions, the bushings are hydrophobic, heat-resistant up to 500°F, and resistant to water and common automotive chemicals. These bushings are covered by a limited lifetime warranty which covers material cracking, separation of the Teflon liner and polyurethane bushing, or squeaking under normal street or track conditions. Features: Manufactured From High-Quality, Solid, 0.938” Spring Steel Two Positions for Adjustability Based on Driver Preference Sway Bar Rate Data: 034Motorsport (Soft) - 144% Rate Increase vs. vs. Factory Audi 8V S3/Mk7 Golf R (22.0mm x 3.0mm) Hollow Rear Sway Bar 034Motorsport (Stiff) - 171% Rate Increase vs. Factory Audi 8V S3/Mk7 Golf R (22.0mm x 3.0mm) hollow rear sway bar Attractive Black Powdercoat for Protection From the Elements Beautiful Billet CNC Brackets With Clear Anodizing for Protection From The Elements Locating Collars To Prevent the Sway Bar From Walking Side to Side Greaseless, Maintenance Free, Teflon Lined Polyurethane Bushings Teflon and Polyester Composition Liner That Virtually Eliminates Noise, Vibration and Harshness (NVH). Improves Sway Bar Response Speed Extended Service Life No Additional Lubricant Needed, and Should Not Be Added Hydrophobic and Waterproof, Will Not Absorb Water or Be Affected In Even The Wettest Environments Is Not Chemically Reactive and Will Not Be Affected By Common Chemicals Present In The Automotive Environment Heat Resistant, Can Operate Continuously At Temperature Up to 500°F, Much Higher Than What Any Bushing Would See Limited Lifetime Warranty, Covering Manufacture Defects: Material Cracking Separation Of Teflon Liner and Polyurethane Bushing Squeaking Under Normal (Street/Track) Conditions. What's Included: 034Motorsport MQB AWD RS+ Adjustable Solid Rear Sway Bar Teflon Lined Polyurethane Sway Bar Bushings Billet Aluminum Sway Bar Brackets Sway Bar Bracket Installation Hardware Kit  

    £387.02

  • Sale -10% Milltek Sport - Mini Cooper S F66 2.0T B48 - GPF Back Exhaust System (Multiple Options)

    Milltek Sport Milltek Sport - Mini Cooper S F66 2.0T B48 - GPF Back Exhaust System (Multiple Options)

    Non-Resonated (louder) OPF/GPF Back Systems to Standard or Sport Diffuser Key facts Pipe Ø: 3.00" (76.20mm) Barcode (GTIN): Tip style: 100mm GT100 Fitting takes from 1.00 to 1.50 hours FITS: New Mini Mk4 Cooper S F66 2.0T B48 2024 and Later Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

    £647.44 - £1,445.80

  • Sale -10% Milltek Sport - Mini Cooper S F66 2.0T B48 - GPF Bypass

    Milltek Sport Milltek Sport - Mini Cooper S F66 2.0T B48 - GPF Bypass

    This product alters a factory emissions control device and does not meet current emission laws. For motorsport use only. Key facts Pipe Ø: 3.00" (76.20mm) FITS: New Mini Mk4 Cooper S F66 2.0T B48 2024 and Later Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

    £167.40 - £171.16

  • APR Turbo Inlet System - EA888 Gen4 265-333ps MQB Evo Models

    APR APR Turbo Inlet System - EA888 Gen4 265-333ps MQB Evo Models

    APR Turbo Inlet System - EA888 Gen4 265-333ps MQB Evo Models Compatible Vehicles -Volkswagen- Golf Mk8- Audi S3 (8Y) The APR Turbo Inlet System is a comprehensive upgrade to your factory or modified intake system. To maximize performance addressing the restrictive components between the airbox and turbocharger are a top priority. It's common to individually upgrade these components, but doing so is not ideal as it mean sacrificing overall design for the sake of compatibility. This is why the APR system is one complete upgrade from the turbocharger to the intake airbox. We were able to increase the diameter as large as possible with the best geometry from the turbo to the intake airbox to promote the maximum amount of flow with the lowest pressure drop. The system starts at 80mm and can expand up to 88mm for larger airbox systems. On the Golf R we increased flow by over 30% at each measured inlet depression! This means the turbo doesn't have to work as hard, which translates to lower temperature, and improved performance. This system is compatible with the factory intake airbox, and works perfectly with an APR intake filter for those who prefer a "stealth" OE airbox upgrade. Over a 30% increase in flow, lower pressure drop, optimized performance over stock Full system addresses all restrictions between the turbocharger and airbox Wire-reinforced hose lined with fluorosilicone for oil and fuel resistance Billet DV connector Fits 80mm and 88mm airboxes Perfect upgrade for the factory airbox or upgraded “airbox only” intake systems Turbo inlet adapter is removable and can be modified for larger turbo setups

    £335.86

  • Sale -10% Milltek Sport - VW Golf MK8 & MK8.5 'R' - GPF Back Exhaust System (Multiple Options) (Copy) (Copy)

    Milltek Sport Milltek Sport - VW Golf MK8 & MK8.5 'R' - GPF Back Exhaust System (Multiple Options) (Copy) (Copy)

    Key facts Pipe Ø: 3.15" (80.00mm) Barcode (GTIN): Tip style: 115mm GT115 Fitting takes from 1.00 to 1.50 hours ALSO FITS: Volkswagen Golf Mk8 R 2.0 TSI 320PS (GPF Equipped Models Only) 2021 to 2024 Volkswagen Golf Mk8.5 R (333ps OPF/GPF Equipped Models Only) 2024 and Later Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

    £1,601.66 - £2,659.41

  • Sale -10% Milltek Sport - VW Golf MK8 & MK8.5 GTi Clubsport - GPF Back Exhaust System (Multiple Options) (Copy)

    Milltek Sport Milltek Sport - VW Golf MK8 & MK8.5 GTi Clubsport - GPF Back Exhaust System (Multiple Options) (Copy)

    Key facts Pipe Ø: 3.15" (80.00mm) Barcode (GTIN): Tip style: 115mm GT115 Fitting takes from 1.00 to 1.50 hours ALSO FITS: Volkswagen Golf Mk8 GTi (245ps Non-GPF / North American Models Only) 2021 to 2024 Volkswagen Golf Mk8 GTi (245ps OPF/GPF Equipped Models Only) 2020 to 2024 Volkswagen Golf Mk8 GTi Clubsport (300ps OPF/GPF Equipped Models Only) 2021 to 2024 Volkswagen Golf Mk8.5 GTi (265ps OPF/GPF Equipped Models Only) 2024 and Later Volkswagen Golf Mk8.5 GTi Clubsport (300ps OPF/GPF Equipped Models Only) 2024 and Later Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

    £958.70 - £1,447.59

  • Sale -10% Milltek Sport - VW Golf MK8 & MK8.5 GTi (245 & 265ps) GPF Back Exhaust System (Multiple Options)

    Milltek Sport Milltek Sport - VW Golf MK8 & MK8.5 GTi (245 & 265ps) GPF Back Exhaust System (Multiple Options)

    Key facts Pipe Ø: 3.15" (80.00mm) Barcode (GTIN): Tip style: 115mm GT115 Fitting takes from 1.00 to 1.50 hours ALSO FITS: Volkswagen Golf Mk8 GTi (245ps Non-GPF / North American Models Only) 2021 to 2024 Volkswagen Golf Mk8 GTi (245ps OPF/GPF Equipped Models Only) 2020 to 2024 Volkswagen Golf Mk8 GTi Clubsport (300ps OPF/GPF Equipped Models Only) 2021 to 2024 Volkswagen Golf Mk8.5 GTi (265ps OPF/GPF Equipped Models Only) 2024 and Later Volkswagen Golf Mk8.5 GTi Clubsport (300ps OPF/GPF Equipped Models Only) 2024 and Later Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

    £958.70 - £1,447.59

  • Sale -10% Milltek Sport - Audi S3 8Y (OPF/GPF Models) Downpipe with Sports Cat or Decat (& GPF Bypass)

    Milltek Sport Milltek Sport - Audi S3 8Y (OPF/GPF Models) Downpipe with Sports Cat or Decat (& GPF Bypass)

    This product alters a factory emissions control device and does not meet current emission laws. For motorsport use only. 94mm / 3.7inch ID Turbo Outlet to 80mm / 3.15inch Downpipe with OR Without Cat, Includes OPF/GPF Bypass Key facts Pipe Ø: 3.70" (94.00mm) Barcode (GTIN): Fitting takes from 4.00 to 4.50 hours ALSO FITS: Audi S3 2.0TFSI Quattro Sportback 310PS 8Y (OPF/GPF Models Only) 2020 and Later Audi S3 2.0TFSI Quattro Saloon/Sedan 310PS 8Y (OPF/GPF Models Only) 2020 and Later Volkswagen Golf Mk8 R 2.0 TSI 320PS (GPF Equipped Models Only) 2021 to 2024 Volkswagen Golf Mk8.5 R (333ps OPF/GPF Equipped Models Only) 2024 and Later Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

    £616.64 - £1,195.08

  • Sale -10% Milltek Sport - VW Golf MK8 & 8.5 'R' (OPF/GPF Models) Downpipe with Sports Cat or Decat (& GPF Bypass)

    Milltek Sport Milltek Sport - VW Golf MK8 & 8.5 'R' (OPF/GPF Models) Downpipe with Sports Cat or Decat (& GPF Bypass)

    This product alters a factory emissions control device and does not meet current emission laws. For motorsport use only. 94mm / 3.7inch ID Turbo Outlet to 80mm / 3.15inch Downpipe with OR Without Cat, Includes OPF/GPF Bypass Key facts Pipe Ø: 3.70" (94.00mm) Barcode (GTIN): Fitting takes from 4.00 to 4.50 hours ALSO FITS: Audi S3 2.0TFSI Quattro Sportback 310PS 8Y (OPF/GPF Models Only) 2020 and Later Audi S3 2.0TFSI Quattro Saloon/Sedan 310PS 8Y (OPF/GPF Models Only) 2020 and Later Volkswagen Golf Mk8 R 2.0 TSI 320PS (GPF Equipped Models Only) 2021 to 2024 Volkswagen Golf Mk8.5 R (333ps OPF/GPF Equipped Models Only) 2024 and Later Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

    £616.64 - £1,195.08

  • Sale -10% Milltek Sport - VW Golf MK8 & 8.5 GTi Including Clubsport (OPF/GPF Models) Downpipe with Sports Cat or Decat (& GPF Bypass)

    Milltek Sport Milltek Sport - VW Golf MK8 & 8.5 GTi Including Clubsport (OPF/GPF Models) Downpipe with Sports Cat or Decat (& GPF Bypass)

    This product alters a factory emissions control device and does not meet current emission laws. For motorsport use only. 94mm / 3.7inch ID Turbo Outlet to 80mm / 3.15inch Downpipe with OR Without Cat, Includes OPF/GPF Bypass Key facts Pipe Ø: 3.70" (94.00mm) Barcode (GTIN): Fitting takes from 4.00 to 4.50 hours ALSO FITS: Seat Cupra Formentor 2.0TSI 245ps (MQB Evo - OPF/GPF Equipped Models) 2022 and Later Seat Leon Cupra Leon 2.0TSI 245ps (MQB Evo - OPF/GPF Equipped Models) 2022 and Later Skoda Octavia vRS 2.0 TSI 245PS (MQB EVO Mk4) Hatch & Estate (OPF/GPF Models Only) 2020 and Later Volkswagen Golf Mk8 GTi (245ps OPF/GPF Equipped Models Only) 2020 to 2024Volkswagen Golf Mk8 GTi Clubsport (300ps OPF/GPF Equipped Models Only) 2021 to 2024 Volkswagen Golf Mk8 GTi Clubsport (300ps OPF/GPF Equipped Models Only) 2021 to 2024 Volkswagen Golf Mk8.5 GTi (265ps OPF/GPF Equipped Models Only) 2024 and Later Volkswagen Golf Mk8.5 GTi Clubsport (300ps OPF/GPF Equipped Models Only) 2024 and Later Volkswagen Golf Mk8.5 GTi Clubsport (300ps OPF/GPF Equipped Models Only) 2024 and Later Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

    £603.16 - £1,181.61

  • Sale -10% Milltek Sport - Skoda Octavia vRS 2.0 TSI 245PS (MQB EVO Mk4) Hatch & Estate (OPF/GPF Models) Downpipe with Sports Cat or Decat (& GPF Bypass)

    Milltek Sport Milltek Sport - Skoda Octavia vRS 2.0 TSI 245PS (MQB EVO Mk4) Hatch & Estate (OPF/GPF Models) Downpipe with Sports Cat or Decat (& GPF Bypass)

    This product alters a factory emissions control device and does not meet current emission laws. For motorsport use only. 94mm / 3.7inch ID Turbo Outlet to 80mm / 3.15inch Downpipe with OR Without Cat, Includes OPF/GPF Bypass Key facts Pipe Ø: 3.70" (94.00mm) Barcode (GTIN): Fitting takes from 4.00 to 4.50 hours ALSO FITS: Seat Cupra Formentor 2.0TSI 245ps (MQB Evo - OPF/GPF Equipped Models) 2022 and Later Seat Leon Cupra Leon 2.0TSI 245ps (MQB Evo - OPF/GPF Equipped Models) 2022 and Later Skoda Octavia vRS 2.0 TSI 245PS (MQB EVO Mk4) Hatch & Estate (OPF/GPF Models Only) 2020 and Later Volkswagen Golf Mk8 GTi (245ps OPF/GPF Equipped Models Only) 2020 to 2024Volkswagen Golf Mk8 GTi Clubsport (300ps OPF/GPF Equipped Models Only) 2021 to 2024 Volkswagen Golf Mk8 GTi Clubsport (300ps OPF/GPF Equipped Models Only) 2021 to 2024 Volkswagen Golf Mk8.5 GTi (265ps OPF/GPF Equipped Models Only) 2024 and Later Volkswagen Golf Mk8.5 GTi Clubsport (300ps OPF/GPF Equipped Models Only) 2024 and Later Volkswagen Golf Mk8.5 GTi Clubsport (300ps OPF/GPF Equipped Models Only) 2024 and Later Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

    £603.16 - £1,181.61

  • Sale -10% Milltek Sport - Seat Leon Cupra Leon 2.0TSI 245ps MQB Evo (OPF/GPF Models) Downpipe with Sports Cat or Decat (& GPF Bypass)

    Milltek Sport Milltek Sport - Seat Leon Cupra Leon 2.0TSI 245ps MQB Evo (OPF/GPF Models) Downpipe with Sports Cat or Decat (& GPF Bypass)

    This product alters a factory emissions control device and does not meet current emission laws. For motorsport use only. 94mm / 3.7inch ID Turbo Outlet to 80mm / 3.15inch Downpipe with OR Without Cat, Includes OPF/GPF Bypass Key facts Pipe Ø: 3.70" (94.00mm) Barcode (GTIN): Fitting takes from 4.00 to 4.50 hours ALSO FITS: Seat Cupra Formentor 2.0TSI 245ps (MQB Evo - OPF/GPF Equipped Models) 2022 and Later Seat Leon Cupra Leon 2.0TSI 245ps (MQB Evo - OPF/GPF Equipped Models) 2022 and Later Skoda Octavia vRS 2.0 TSI 245PS (MQB EVO Mk4) Hatch & Estate (OPF/GPF Models Only) 2020 and Later Volkswagen Golf Mk8 GTi (245ps OPF/GPF Equipped Models Only) 2020 to 2024Volkswagen Golf Mk8 GTi Clubsport (300ps OPF/GPF Equipped Models Only) 2021 to 2024 Volkswagen Golf Mk8 GTi Clubsport (300ps OPF/GPF Equipped Models Only) 2021 to 2024 Volkswagen Golf Mk8.5 GTi (265ps OPF/GPF Equipped Models Only) 2024 and Later Volkswagen Golf Mk8.5 GTi Clubsport (300ps OPF/GPF Equipped Models Only) 2024 and Later Volkswagen Golf Mk8.5 GTi Clubsport (300ps OPF/GPF Equipped Models Only) 2024 and Later Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

    £603.16 - £1,181.61

  • Sale -10% Milltek Sport - Seat Cupra Formentor 2.0TSI 245ps MQB Evo (OPF/GPF Models) Downpipe with Sports Cat or Decat (& GPF Bypass)

    Milltek Sport Milltek Sport - Seat Cupra Formentor 2.0TSI 245ps MQB Evo (OPF/GPF Models) Downpipe with Sports Cat or Decat (& GPF Bypass)

    This product alters a factory emissions control device and does not meet current emission laws. For motorsport use only. 94mm / 3.7inch ID Turbo Outlet to 80mm / 3.15inch Downpipe with OR Without Cat, Includes OPF/GPF Bypass Key facts Pipe Ø: 3.70" (94.00mm) Barcode (GTIN): Fitting takes from 4.00 to 4.50 hours ALSO FITS: Seat Cupra Formentor 2.0TSI 245ps (MQB Evo - OPF/GPF Equipped Models) 2022 and Later Seat Leon Cupra Leon 2.0TSI 245ps (MQB Evo - OPF/GPF Equipped Models) 2022 and Later Skoda Octavia vRS 2.0 TSI 245PS (MQB EVO Mk4) Hatch & Estate (OPF/GPF Models Only) 2020 and Later Volkswagen Golf Mk8 GTi (245ps OPF/GPF Equipped Models Only) 2020 to 2024Volkswagen Golf Mk8 GTi Clubsport (300ps OPF/GPF Equipped Models Only) 2021 to 2024 Volkswagen Golf Mk8 GTi Clubsport (300ps OPF/GPF Equipped Models Only) 2021 to 2024 Volkswagen Golf Mk8.5 GTi (265ps OPF/GPF Equipped Models Only) 2024 and Later Volkswagen Golf Mk8.5 GTi Clubsport (300ps OPF/GPF Equipped Models Only) 2024 and Later Volkswagen Golf Mk8.5 GTi Clubsport (300ps OPF/GPF Equipped Models Only) 2024 and Later Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

    £603.16 - £1,181.61

  • Sale -10% Enhanced Performance - Chassis Lockdown Alignment Kit - Ford Fiesta ST MK7 ST180 / ST200

    Enhanced Performance Enhanced Performance - Chassis Lockdown Alignment Kit - Ford Fiesta ST MK7 ST180 / ST200

    0 Reviews

    20 in stock

    Introducing for the Fiesta ST MK8 / 8.5 and the Fiesta MK7 ST180 / ST200 - the Enhanced Performance front Subframe/Chassis Lockdown alignment kit. After checking the subframe alignment to the body when removing the front subframe bolts on a Fiesta ST MK8 and fiesta st180, we were astonished at how far adrift the subframe was sitting in comparison to the body. What's the point? Simple- ask any race team how important a square chassis to subframe set up is prior to making adjustments to toe, camber and caster. Essentially, left without this kit your alignment is set up wrong to compensate for a non square chassis. Treat your Fiesta ST MK8/8.5 and MK7 ST180/200 to the perfect first mod before starting  your tuning journey KEY Specs:- AREO SPACE T6061 Billet Machined aluminium Top hat design to ensure perfect location  Hard anodised Black for durability  All important EP Logo ** Please note 4 wheel alignment will be compulsory with this product**  

    20 in stock

    £50.00£45.00

  • Sale -10% Enhanced Performance - Chassis Lockdown Alignment Kit - Ford Fiesta ST Mk8 / 8.5

    Enhanced Performance Enhanced Performance - Chassis Lockdown Alignment Kit - Ford Fiesta ST Mk8 / 8.5

    0 Reviews

    19 in stock

    Introducing for the Fiesta ST MK8 / 8.5 and the Fiesta MK7 ST180 / ST200 - the Enhanced Performance front Subframe/Chassis Lockdown alignment kit. After checking the subframe alignment to the body when removing the front subframe bolts on a Fiesta ST MK8 and fiesta st180, we were astonished at how far adrift the subframe was sitting in comparison to the body. What's the point? Simple- ask any race team how important a square chassis to subframe set up is prior to making adjustments to toe, camber and caster. Essentially, left without this kit your alignment is set up wrong to compensate for a non square chassis. Treat your Fiesta ST MK8/8.5 and MK7 ST180/200 to the perfect first mod before starting  your tuning journey KEY Specs:- AREO SPACE T6061 Billet Machined aluminium Top hat design to ensure perfect location  Hard anodised Black for durability  All important EP Logo ** Please note 4 wheel alignment will be compulsory with this product**  

    19 in stock

    £50.00£45.00

  • Maxton Design -Spoiler Volkswagen Golf R / GTI / R-Line Hatchback Mk7 / Mk7 Facelift

    Maxton Design Maxton Design -Spoiler Volkswagen Golf R / GTI / R-Line Hatchback Mk7 / Mk7 Facelift

     Spoiler Volkswagen Golf R / GTI / R-Line Hatchback Mk7 / Mk7 Facelift FITS:Volkswagen Golf R Hatchback Mk7 2013 - 2016Volkswagen Golf GTI Hatchback Mk7 2013 - 2016Volkswagen Golf R-Line Hatchback Mk7 2013 - 2016Volkswagen Golf R Hatchback Mk7 Facelift 2016 - 2020Volkswagen Golf GTI Hatchback Mk7 Facelift 2016 - 2020Volkswagen Golf R-Line Hatchback Mk7 Facelift 2016 - 2020 Item is supplied UNPAINTED and will require Test fit, prep and paint prior to install!COMPLETE SET CONTAINS:-> Spoiler Our fiberglass products are handmade. Please understand that this could mean the product requires adjustments before beginning the installation / painting process. If the product arrives with any scuff marks it will not affect the finish, as it is unpainted, and preparation needs to be completed first. Adjustments include: - Sanding – Essential - Priming – Essential - Shaping - Possible We always recommend taking such products to a professional body shop that specialises in or is familiar with fiberglass  

    £277.00

  • P3 Performance Gauge - Audi A3 8Y (inc. S3/RS3) 2020> V3 OBD2 Gauge

    P3 P3 Performance Gauge - Audi A3 8Y (inc. S3/RS3) 2020> V3 OBD2 Gauge

    P3 V3 OBD2 Gauge Basic Features Plug and Play Install - plugs directly into your OBD2 port (Want to keep your OBD2 port open? The P3 hard-wire harness kit also available) OEM Integration - installs in your vent for a sleek install while retaining air flow Versatility - read boost from multiple OEM sensors through OBD2 port or using optional P3 analogue boost sensor Code Reading/Clearing - read and clear diagnostic trouble codes (DTCs) on the fly P3 V3 Gauge Readouts (all readouts can be individually configured to read in either Imperial or Metric units) Boost (via OBD2 port using OEM sensors or P3 analogue boost sensor) Coolant temperature Air/Fuel ratio (AFR or Lambda) Vehicle speed (can be calibrated in 1% increments from -9% to +20%) Intake air temperature Throttle angle Ignition timing Engine RPM Exhaust gas temperature Battery voltage Programmable shift light analogue input 1 (brown wire) can allow gauge to read any 0-5 volt linear output sensor analogue input 2 (blue wire) can allow gauge to read any 0-5 volt linear output sensor Acceleration timers (0-60mph/0-100mph/60-130mph) Braking timers (60-0mph/100-0mph) Optional Add-Ons P3 analogue Boost sensor - plugs directly into gauge harness, no wiring required) Boost tubing kit - Approx. 5' of 5/32" O.D. flexible plastic boost tubing with vacuum "T" and 3 sections of 5/32" I.D. vaccum hose. Includes 3 zip ties P3 ESVA (Ethanol Sensor Voltage Adaptor) allows your gauge to read ethanol content and fuel temperature directly from the common Continental/GM flex fuel sensor. *Ethanol sensor NOT included Trim Removal Kit - this tool kit will help you remove your vent and interior trim while minimizing the chance of scratching or damaging your trim OBD2 Splitter - attach multiple devices to your OBD2 port. *some devices will not function while another device is attached to the OBD2 port

    £385.00

  • AIRTEC Motorsport Induction Kit for Vauxhall Astra J CDTI

    Airtec AIRTEC Motorsport Induction Kit for Vauxhall Astra J CDTI

    As part of our expanding Vauxhall product range, AIRTEC Motorsport is proud to launch our induction kit upgrade for the Astra J diesel models. Developed in-house at AIRTEC HQ in the UK, we’ve created a solution to improving the original air intake system to allow more flow whilst maintaining low intake temperatures, therefore improving response, sound and aesthetics within the engine bay. As a result, we chose to utilise the original air box base with an enlarged, two-piece laser cut lid. This increases the capacity of the air box to allow the fitment of an 80mm cone air filter whilst retaining the original front air feed that ensures a constant flow of fresh air is forced into the air box. The result is increased power, improved throttle response, heightened induction noise and a more pleasing look to the engine bay. The kit is a direct replacement that requires no additional drilling or cutting to fit and comes complete with all the correct fixtures and fittings, as well as detailed installation instructions. Fits:Astra J 1.3 CDTi Astra J 1.7 CDTi Astra J 2.0 CDTi  Features:  Comprehensive kit designed specifically for the Astra J diesel platform Large cotton air filter for improved flow and increased performance Utilises original air box base with an enlarged two-piece laser cut lid Retains original front intake to direct constant feed of cold air to the filter Improved soundtrack and under bonnet aesthetics Long lasting, high quality black powder coat finish Includes all fixtures and detailed fitting instructions AIRTEC part no: ATIKVAUX5

    £189.00

  • Sale -18% AIRTEC Motorsport Intercooler for Vauxhall Astra J 2.0 CDTI

    Airtec AIRTEC Motorsport Intercooler for Vauxhall Astra J 2.0 CDTI

    As part of our expanding Vauxhall platform product range, AIRTEC Motorsport is proud to launch our intercooler kit for the Astra CDTi 2.0, suitable for track or fast road use. In order to ensure there is no noticeable loss in performance during extended periods of hard driving, we have developed a larger, freer-flowing intercooler that is a direct replacement for the smaller and more restrictive OEM item. Our solution to increasing the intercooler’s size and performance within the confines of the limited space behind the bumper is based upon a core design that is wider, taller and deeper.  This offers a huge increase in overall capacity in comparison to the original intercooler, as well as a substantial increase in frontal area over standard, which allows it to make the most of the air flow provided.  Together with our high-flow, moulded one-piece cast end tanks and air guide to ensure flow is directed correctly and efficiently, the AIRTEC Motorsport intercooler offers much greater efficiency and volume over standard. Available in a high quality powder coated black finish, the comprehensive kit is a direct replacement and comes with Pro Hoses silicone connectors, all fixtures and fittings, as well as detailed fitting instructions. Its improved cooling efficiency and easy fitment makes it an essential modification for all modified Astra CDTi 2.0 models. Dimensions:Width: 740mmHeight: 170mmDepth: 70mmCapacity: 8.8 litresFront Area: 1,258cm² Features: Huge increase in capacity and frontal area Improved cooling ability Reduced charge temperatures High-flow, moulded one-piece cast end tanks Powder coated black finish All fittings and fixtures included Comes with detailed fitting guide   AIRTEC part no: ATINTVAUX15

    £729.75£595.95

  • Baf Motorsport -  Honda CR-Z ZF K-Brace

    Baf Motorsport Baf Motorsport - Honda CR-Z ZF K-Brace

    K-Brace® For Honda CR-Z ZF (Rear Strut Brace) Improves vehicle stability and control. Provides an extra layer of safety during impacts Engine / Model - Fits All Honda CR-Z Models including Facelift Models: ZF, ZF1 & ZF2 Year: 2010-17 Mounting points - 4 Fitting kit included International delivery available Un-Coated strut braces are dispatched within 7 working days Powder Coated braces are usually dispatched within 14 working days

    £153.99 - £219.99

  • GFB DV+ Diverter Valve with integrated solenoid for Ford EcoBoost Engines

    GFB GFB DV+ Diverter Valve with integrated solenoid for Ford EcoBoost Engines

    Supplied with integrated solenoid THE T9384 IS THE LATEST ADDITION TO THE DV+ RANGE OF DIVERTER VALVES FROM GFB (GO FAST BITS).GFB engineers have specifically designed the T9384 as a complete drop-in replacement for the OEM diverter valve in late-model Ford vehicles.Unlike the earlier generation diverter valves manufactured by Pierburg, the newer Continental branded OEM valves cannot be disassembled and incorporated into a DV+. Therefore, GFB developed the T9384 with a low-profile integrated solenoid as a complete replacement for both the Continental and Pierburg diverter valves, enabling a hassle-free installation with no clearance issues. Fits: Ford Mustang S550 2.3 EcoBoost 2019-2023 Ford Fiesta ST 1.5 EcoBoost 2019-On Ford Focus 1.5 EcoBoost (4 Cylinder) (Mk4 2019-On) Ford Fiesta ST 1.6 Ecoboost 2013-2017 (US Spec Only) Ford Mustang S550 2.3 EcoBoost 2014-2018 Ford Focus 1.5/1.6 EcoBoost (Mk3 2015-18) Ford Focus ST 2.3L EcoBoost (Mk4 2019-On) Ford Mustang S550 2.3 EcoBoost 2019-2023 Ford Ranger Raptor 3.0 EcoBoost 2022-On Kit includes: 1 x T9384       VTA blow-off valves are constructed with the same materials and valve mechanism as the DV+, and they offer the exact same performance and boost holding. However, venting to atmosphere gives it the signature blow-off sound, whilst the DV+ keeps things quiet. Competitors' products for the same vehicles that make sound (i.e. BOV "Spacers") typically retain the performance deficiencies of the factory diverter valve, delete the ECU control, or require frequent maintenance and rebuilds. The VTA on the other hand is the complete package - performance, fit, reliability, and sound! Like the DV+, GFB’s VTA range of BOVs utilise GFB’s proven TMS Technology to ensure rapid boost recovery on gearshift and optimum throttle response, as well as superior boost holding. However, where the DV+ and the VTA range differ is what they do with the vented air. VTA BOVs vent to atmosphere to make the signature turbo blow-off sound, where the DV+ recirculates the air to keep it quiet. Each valve in the VTA range is designed specifically for the applications we list them for, ensuring the best fit and performance. Most of the VTA range are designed for use on cars with solenoid type factory diverter valves, and in those cases the VTA kit will retain the solenoid and ECU control. Like the DV+ though, it replaces the weak factory valve internals to ensure strength and reliability, especially in high boost applications. Other versions of the VTA are designed for use on cars that do not have any kind of factory fitted diverter valve. Vehicle manufacturers have deleted the troublesome solenoid type diverter valve from some of the newer models, but this leads to turbo compressor surge which can be taxing on the turbo in the long run. The VTA valves for these cars are designed to re-introduce the function of a diverter/blow-off valve to help protect the turbo in the long term and provide a blow-off sound.

    £176.40

  • ITG Induction Kit - Hyundai i20N

    ITG Filters ITG Induction Kit - Hyundai i20N

    Suitable for: Hyundai i20 BC Front Wheel Drive (2020 and later) Following on from our highly successful offering for the Hyundai i30N, ITG are pleased to announce the launch of our new cold air induction system for the Hyundai i20N. The i20 N is powered by a 1.6-litre turbocharged GDi engine with six-speed manual transmission (6MT)that boasts a max power of 204ps.Choose between our Trusted TriFoam Maxogen filter or our exciting new Pleated Cotton Gauze filter, to replace your restrictive standard airbox design.ITG also offer an additional silicone intake hose upgrade, which smooths & accelerates airflow through the inlet tract into the turbocharger. Our Silicone Hose has been optimised for use with the ITG Induction System, but also fits onto the standard airbox. By upgrading to the ITG hose, a notable increase in intake noise is also found; as unlike the OE hose the ITG part does not feature a restrictive noise silencer chamber.Available to purchase separately or as part of a full induction system  Will an ITG ProFilter increase performance? Yes, an ITG ProFilter can increase performance. It is a high-flow air filter upgrade designed to fit inside the car’s existing airbox. It is designed to provide better filtration than a standard paper air filter while offering a larger open surface area. This can result in increased horsepower, torque, and improved throttle response. Is there an environmental benefit to using an ITG ProFilter? Another critical benefit to note is the environmental one. The ITG ProFilter is designed to be reusable, whereas a single-use paper filter is not. When you replace a single-use paper filter, you are throwing away a filter that is only partially used. With a cleanable filter, you can reuse the filter many times, reducing the amount of waste produced.Second, cleanable air filters can save energy. When a dirty air filter is used, it can restrict airflow to the engine. This can cause the engine to work harder, decreasing fuel efficiency and increasing emissions. A cleanable filter can help keep the engine running smoothly and efficiently, saving fuel and reducing emissions.

    £258.00

  • Maxton Design -  Front Splitter Ford Tourneo Courier Mk2

    Maxton Design Maxton Design - Front Splitter Ford Tourneo Courier Mk2

    Front Splitter Ford Tourneo Courier Mk2 FITS:Ford Tourneo Courier Mk2 2023 -   COMPLETE SET CONTAINS:-> Front Splitter-> Fitting Kit-> Fitting ManualCOLOUR:-> Gloss Black CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> Front Splitters help produce a larger surface area for downforce, improving vehicle stability.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.-> The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.  Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox We can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.All products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches.

    £219.00

Close